Best Power Blenders

• What You Need to Know
• A high-performance blender is basically a stand mixer with a power of at least 1,000 watts.
• It is perfect for preparing smoothies, soups, dressings, purees and ice cream.
• The powerful motor can handle just about any food. However, the noise level is high.
• Depending on the model, either sharp blades or blunt beater blades are used for chopping.
• The high-performance blender should be cleaned thoroughly after each use.

A stand mixer with panache

Blenders are part of the standard equipment of a complete kitchen. They are versatile: smoothies, protein shakes and dressings, among other things, can be prepared in them. Stand mixers and hand blenders are the most common. These two types are usually inexpensive and take up little space, but they can process most ingredients.

But conventional blenders can’t do everything. For some harder foods, they lack the motor power. If you really want to blend everything, you need a high-performance blender. It is true that high-performance blenders resemble stand blenders in appearance. However, while stand mixers do not exceed 1,000 watts, the power of high-performance mixers only starts at this wattage. The high motor power also leads to a higher speed. Even nuts, ice and fibrous vegetables are finely chopped into a homogeneous mass. This is why these appliances are mainly used in the catering industry, where a variety of ingredients and speed are important. After all, high-performance blenders are much faster than stand mixers or hand blenders and have several programmes. On the other hand, they often take up more space, are heavier and cost considerably more. You will hardly find a high-quality model for less than 300 euros.

Construction of a high-performance blender

In terms of design, high-performance blenders are almost indistinguishable from stand mixers. As a rule, however, the former have several controls or can be adjusted more precisely than blenders with only an on-off button or a control dial. In addition, high-performance blenders often come with a pestle or tamper with which users can stir the contents during blending. The basic equipment of such blenders includes

• A glass or plastic container with a handle,
• a stainless steel blade,
• a lid, possibly with an opening for the pestle,
• and the base or stand, which includes the motor, the controls and the mains cable.

What a high-performance blender mixes

There is hardly anything that a high-performance blender cannot blend. Where simple blenders fail, it whirls its blades around for a few seconds and the contents become a pulpy mass. It is therefore always used when a wide variety of foods need to be finely chopped.

Drinks

Thick soups and mush

Sauces and dressings

Ice cream

It all depends on the power

The line between a stand mixer and a high-performance mixer is somewhat blurred. However, many, including Stiftung Warentest, draw it at a power of 1,000. Usually, the power reaches up to about 2,000 watts, and some models even reach 2,500 watts. The stronger motor power enables such blenders to process several ingredients faster and finer.

Speed

The speed depends on the motor power. It is true that power in watts and in revolutions per minute are not one-to-one dependent on each other. Nevertheless, the speed usually increases with the wattage. The latter is usually between 20,000 and 30,000 revolutions per minute. Power winners can even reach 40,000 revolutions per minute. For your safety, it is advantageous if the blender has suction cups so that it does not shift despite the high speed.

Arnold Schwarzenegger’s protein shake

Bodybuilder icon Arnold Schwarzenegger swears by his protein shake recipe: a glass of almond milk, a shot of cherry juice, a banana and some protein powder. Now all that’s missing is the secret ingredient, a whole raw egg with shell. A good quality blender should ensure that the shell is completely crushed so that no pieces of shell remain. According to Arnie, a shot of schnapps can also be added, depending on the mood. Cheers!

Power consumption

The more watts, the higher the power consumption. The power of the appliances is reflected accordingly in the electricity bill. However, power consumption also depends on how you use the appliance. For example, you do not always have to set it to full speed if fewer revolutions are sufficient. In addition, the length of use is a decisive factor for the electricity bill. After all, high-performance blenders chop ingredients much faster than standard stand mixers.

Volume

High-performance blenders are very loud. The noise level can vary depending on the speed and content. Chopping nuts at 30,000 revolutions, for example, is louder than chopping fruit at 20,000 revolutions. It will be loud in any case. Most blenders have a volume of between 80 and 90 decibels. This is roughly equivalent to the noise of a lawn mower.

Other purchase criteria

It is true that performance is the most important factor when it comes to high-performance blenders. However, safety and convenience also play a role. The programme variety, operation and container material, for example, are also relevant.

Convenience and usability

High-performance blenders are usually larger and heavier than simple stand mixers. However, this is not necessarily a disadvantage. They do take up more space on the kitchen counter, but with increasing size comes a larger capacity: usually between 1.5 and 2.5 litres. Then you can blend smoothies for more than one or two people, for example. The weight – usually between 4 and 10 kilograms – does make transport a little heavier. At the same time, however, it provides stability at a very high speed.

It is also important that the appliance allows some settings. On the one hand, this requires various programmes and, on the other, extensive controls. Strictly speaking, the power must be adjustable. Certain functions such as the smoothie, crushed ice and pulse functions are particularly popular among users. To set the programmes, you need a user interface. Buttons, dials or a touchscreen fulfil this purpose. Only an on-off button, as with some simple stand mixers, is not sufficient.

Blades: sharp or blunt?

Sharp crossed blades

Sharp crossed blades create a vortex so that all ingredients are processed evenly. There are usually four to eight such blades, pointed in all directions. The sharp blades chop the contents particularly finely, even at lower speeds. However, there is a certain risk of injury with them, for example if you reach in to scrape out the last bits from the bottom of the container. In addition, the blades can become blunt after long use.

Dull beater blades

Blunt beater blades usually look like propellers, but their ends are pointed upwards to create the swirl effect. These beater knives do not have sharp blades. It is true that they do not crush as finely as sharp blades. However, thanks to the motor power, you can pulverise hard contents without having to cut them up. For this, effective use requires a slightly higher speed than is the case with models with sharp blades. Many users report a slightly more intense taste with such knives. Presumably, more flavours are released when pulverising than when cutting. Moreover, when the device is switched off, you can even reach in with your fingers without risking injury. This is not the case with sharp blades. However, when the appliance is running, percussion blades are just as dangerous as blades.

The material of the container

The containers of high-performance blenders are made of either glass or plastic. Glass is particularly easy to clean, free of harmful substances and tasteless. However, the material is much heavier than plastic. The biggest disadvantage is that glass can shatter at very high speeds, which not only makes the appliance unusable, but also poses a risk of injury. That is why most manufacturers prefer plastic, more precisely the high-quality, robust and BPA-free (bisphenol A) titanium plastic.

Cleaning tips

All parts of the blender that come into contact with food should be cleaned after each use. Otherwise germs and mould will quickly form. Depending on the model, there are various ways to do this. It is important to let the components dry after each cleaning before you reassemble and store the blender.

If your blender can be taken apart, you can clean the components to be washed in the dishwasher. This includes the container, the blade, the lid and, if necessary, the pusher. To ensure that the components are dishwasher safe, you should consult the manufacturer’s instructions. Alternatively, you can clean each part by hand.

You can wipe other surfaces such as the stand with a damp cloth as needed. Never hold the electronic components under water.