Best Pizza Stones

• The most important facts in brief
• With the help of a pizza stone, users can conjure up a crispy, delicious pizza at home, just like at the Italian restaurant.
• The stones, which are made entirely of natural materials and can store heat for a long time, require a preheating time.
• When cleaning, the user should avoid water and sharp objects if possible. A ceramic hob scraper is recommended.

The operating principle of the stone oven

The stone slabs that line the inside of the oven can be made of different materials, such as cordierite, granite, soapstone or fireclay. These retain the heat for many hours, making the pizza incomparably crispy in no time at all, without drying out the ingredients on the dough base.

In principle, the pizza stone in the home kitchen works in exactly the same way as the large, permanently installed pizza oven at the Italian restaurant. The pizza stone absorbs the condensation water under the dough. Furthermore, the direct contact heat cooks the pizza faster. Depending on the thickness of the stone, usually between 15 and 50 millimetres, it is heated in the oven at maximum temperature – almost always 250 degrees Celsius – 25 to 45 minutes before baking. The heat supply is not turned off during the baking process. The top and bottom heat function is always preferable to convection for baking a pizza. The pizza stone goes into the cold oven on the lower or middle rack so that the air can also circulate under it. Therefore, a baking tray is not suitable. Placing it directly on the oven floor is also not recommended – especially as the plate can cause heat to build up there and damage the heating coils.

No more soggy dough bottoms

And thanks to the nature of the stone, moisture is also transported away – so it does not accumulate. This creates the bubbles in the dough that are typical of stone-oven pizza. The advantage: The pizza stone gives the pizza a crispy crust during baking and the base does not stick to the stone or the pizza peel. Tip: Dust the pizza peel with flour – then the pizza comes off even more easily. Depending on the thickness of the dough, the pizza is ready within five to ten minutes. Preparing a pizza on a grill or baking tray takes at least twice as long.

What differences does the thickness of the pizza stone make?

Depending on the baking device, pizza stone models of different thicknesses are available. If subsequent heating is not possible during baking, for example because charcoal, stoked fire or embers are used, a thick stone is recommended that gives off heat over a very long period. When using in the oven or on the gas grill, thinner stones between 15 and 30 millimetres are advisable, as thicker models require a longer heating time and the thinner stones can be reheated before the next pizza without spending much time.

There is a great risk of burns when removing the finished pizza. With a pizza pusher or a pizza shovel, the pizzaiolo neither touch the hot oven nor the no less hot disc of dough. A real relief!

For preparation without an oven, we recommend using a kettle grill with a lid. The cover creates additional heat in the cooking chamber, so that the topping of the pizza also becomes nice and crispy. The amateur chef can use either a charcoal or a gas grill for this purpose.

Choosing the shape

Which material is best?

The variety of pizza stones is very large. Four different materials dominate the market:

• Soapstone
• Ceramic
• Fireclay or chamotte
• Cordierite

Soapstone: Also suitable for building a stone stove

Soapstone stores heat for a particularly long time and is therefore also used in the construction of stone stoves. The heating time is comparatively long, but still shorter than with cordierite.

Ceramics: comparatively expensive with poorer heat retention

Ceramic is a popular material because it is light and heats up very quickly. However, it does not store heat as well as other materials. This may make reheating necessary.

Fireclay(s): Natural material made of quartz sand

Fireclay is a comparatively inexpensive material and is also used for building fireplaces.

Advantages and characteristics of cordierite variants

The service life of cordierite bricks is generally longer than that of fireclay bricks of normal quality. Due to their materiality, cordierite slabs are also easier to clean: they have no large pores in which ingredients such as flour could get stuck. The production is done completely without chemicals. Only natural raw materials are used, which are fired at around 1,200 degrees Celsius. One could also speak of a kitchen product in organic quality. Due to the way they are manufactured, these pizza stones are absolutely food-safe.

Disadvantages of the cordierite variants

A real fireclay brick is made of clay. Therefore, it has excellent heat storage properties. After heating, this is evenly and slowly released to the pizza base. The open pores in natural products ensure that excess moisture can be dissipated in the form of steam. Most cordierite variants, however, are glazed. This impregnation prevents the residual moisture from evaporating because the pores of the stone are sealed. Therefore, they are not very popular with ambitious pizza bakers. Moreover, the material is rather expensive in comparison.

The colour changes on the surface may be unsightly for some users, but they have no influence on the functionality. The fireclay stone has a different natural colour tone, depending on its origin. This can be yellowish or light grey. The shades make each fireclay brick unique – no two are alike.

Care and cleaning

Colour changes are normal due to the food with which the natural product comes into contact and are virtually impossible to prevent. As the temperature is usually 200 to 250 degrees, this is not a problem: Adhering germs are effectively killed.

Initial cleaning after purchase

Before using the stone for the first time, users should wipe it with a damp but not wet cloth and without detergent. Dirt from the production process and remnants of paper and plastic packaging are thus removed from the stone. The following applies to all variants: Users are always on the safe side if they follow the cleaning and care instructions in the user manual.

After use

As a rule, no dough residue sticks to a sufficiently heated pizza stone, as the pizza base loses liquid due to the even heat and bakes through crispy. Contamination usually occurs when the dough has cracks or holes and the tomato sauce or toppings thus get onto the hot stone or fall off the pizza because the topping is too generous. In this case, the ingredients burn and smoke develops in the oven. The result is greasy and colourless residue on the stone.

Do not clean the pizza stone when it is hot.

Before cleaning, the stone must first cool down, otherwise it can be damaged. If the hot plate comes into contact with water, this sometimes leads to the formation of cracks. Dishwashing detergents attack the natural product and should therefore not be used at all. An attempt to clean it in the dishwasher would be just as damaging.

When thorough cleaning is absolutely necessary

In general, regular, thorough cleaning is not advisable, as it attacks the surface of the pizza stone. For cleaning, the user should use a steel sponge or emery paper and remove the dirt very carefully with it. cases, as the material is quickly worn away. Stubborn dirt can be removed carefully with a steel sponge.

Another cleaning method that is controversially discussed on the internet is cleaning the stone with a high-pressure cleaner. Here, the user should secure the pizza stone against slipping and then carefully blast it. It is important to ensure that only clear water without cleaning additives is used for high-pressure cleaning. These can – similar to hand washing – attack the material. In addition, it is possible that detergent residues remain in cracks in the stone and transfer to the food during subsequent use.

In any case, users should allow the cleaned pizza stone to dry thoroughly before the next use to avoid chipping damage in the hot oven caused by remaining water. Cleaning in the dishwasher is also out of the question. The hot water and cleaning agents would cause the stone to swell.

Pyrolysis

Pyrolysis is the option available on some ovens to heat the appliance to over 500 degrees for a period of about three hours. During this heating phase, dust and food residues decompose into ash. Afterwards, users clean the appliance by sweeping or wiping it out. Although this process consumes more electricity, it also saves users from having to buy an expensive cleaning agent.

Using the pyrolysis function of the oven

If the oven at home has a pyrolysis function, users can clean their pizza stone easily and effectively in this way. The high temperatures ensure that impurities are simply burnt out. After a longer cooling phase, users sweep the dust residue from the surface or wipe it off using a small amount of water.

Variants against monotony

Origin of the pizza

Pizza experienced its rise in southern Italy from the mid-18th century, at the time when tomato was becoming popular there. It was considered a poor man’s food, sold on the street. This original pizza was only drizzled with olive oil and topped with tomato slices and oregano or basil.

But the original form of today’s pizza is much older. The closely related Lingurian focaccia, flatbread-like baked goods, were already widespread in ancient times. Since a very high temperature is required for preparation and this could not be achieved in one’s own four walls, the pizzas were once prepared and then taken to the nearest bakery to be baked until crispy. The craft of the pizzaiolo, the pizza baker with his own stone oven who makes, toppings and bakes the dough himself, did not emerge until later.

In the meantime, pizza has found its place on the European menu. In addition to homemade versions from Italian restaurants or from the kitchen at home, pizzas are nowadays also eaten as ready-made meals. According to the German government’s 2017 nutrition report, the trend towards quick, effortless food preparation is on the rise. No wonder that more and more frozen pizzas are being sold. Ordering pizzas from delivery services over the internet is also very popular, especially among young people.

Pizza recipe

The thinner the pizza dough is rolled out, the better it turns out, but it should not tear or have any holes. The pizza always turns out better on a pizza stone than on a baking tray.

Required ingredients and preparation steps

For the basic dough, pizza makers need only 500 grams of flour, 5 grams of dry yeast, 300 millilitres of water and a teaspoon of salt for four portions.

In the first step, they crumble the yeast into the cold water while stirring. After adding the flour and salt, mix everything with the dough hook of the hand mixer. Now form a dumpling, place it in a bowl, cover it with cling film and leave it to rise at room temperature for one and a half hours. Alternatively, place it in the fridge overnight.

After the rising time, divide the dough into four equal pieces and roll them out on a lightly floured work surface from the inside out to form a thin plate. Then top the dough with the desired ingredients, for example tomato sauce and mozzarella.

Place the pizzas one after the other on a baking tray preheated to 250 degrees Celsius in the oven and put them on a rack in the lower third of the oven for 12 to 15 minutes. They then top the dough pieces with a few leaves of fresh basil if desired and season with salt, pepper and oregano. Some users also like to drizzle a little olive oil over the hot pizza.

And finally, a few interesting facts

• In the USA, 350 pieces of pizza are sold every second
• Pizza Hawaii, the culinary justification for which is a matter of debate, originated in Canada.
• In 2015, every German ate an average of eleven frozen pizzas